Wall cabinets are used to store clothes and should be installed in larger bedrooms. The wall cabinet should be installed against the inner wall and should not be located in direct sunlight.
The door of the wall cabinet generally adopts the sliding door, commonly known as the sliding door wall cabinet.
There are two types of sliding door wall cabinets: less than top type and top type. To the top wall cabinet is from the ground to the bottom of the ceiling, with an upper cabinet.
The width of sliding door wall cabinet is 1200, 1800, 1900, 2400, 2500, 3100mm. 1200mm has 2 doors; 1800mm has 3 doors; 1900mm has 2 doors and fixed fans on both sides; 2400mm has 4 doors; 2500mm has 3 doors and fixed fans on both sides; 3100mm has 4 doors Doors and fixed fans on both sides.
The height of less than top wall cabinet is 1960, 2100mm. In addition to the height of the upper cabinet, the height of the top wall cabinet is also 1960 and 2100mm.
The depth of the wall cabinet is generally 650mm.
The sliding door wall cabinet is composed of sliding door, wall cabinet bottom plate, wall cabinet back plate, wall cabinet side plate, upper cabinet bottom plate, upper cabinet door fan, fixed fan, plate mouth plate, face sticker and so on. Clothes rails and shelves are installed in the cabinet.
The sliding door is composed of 18×35mm wooden keel nailed on both sides of three plywood, and 12×24mm beading is nailed around the door. The upper side of the door leaf is equipped with a pulley and the lower side is left with a flange (or the upper side is left with a flange and the lower side is equipped with a pulley).
The bottom plate of the wall cabinet is made of 20mm thick wood, the bottom plate should be 120mm away from the ground, and the base plate is made of bricks to form a skirting platform. The skirting boards are in the same room.
The backboard of the wall cabinet is composed of 17×45mm wooden keel with three plywoods nailed on one side. The wall mounted on the backboard should be painted with waterproof paint or treated with moisture.
The side panel of the wall cabinet is composed of 17×45 wooden keel with three plywood on one side.
25mm thick wooden board is used for the bottom plate of the upper cabinet.
The upper cabinet door leaf is composed of 18×35mm wooden keel side nails with three plywood boards, 12×24mm beading strips are nailed around the door leaf, and a flange is left on the top of the door leaf.
The fixed fan is composed of 18×35mm wooden keel nailed on both sides of the three plywood, and the fixed fan is nailed around with 12×24 pressure strips.
The cabinet board is made of 20mm thick wood, which is installed on the outside of the pulley of the sliding door of the wall cabinet and the outer opening of the side wall of the wall cabinet.
15×42mm wooden face stickers are used for the face stickers, which are installed on the top and both sides of the wall cabinet.
The clothes rail can be made of wood, stainless steel, etc. The clothes rail is about 1.6m away from the bottom of the cabinet.
The shelf is composed of 12×24mm wooden keel with five plywoods nailed on both sides, and 12×18mm beaded on the periphery. The shelf is installed in the side cabinet inside the fixed fan.
